I am assembling the parts needed to install a 24 V Dc trolling motor. I made my wiring diagram. Can of you experts look at it and tell me if I have this right? Also, where are good places for breakers and what amperage? (There are inline fuses on the dual bank charger leads)
Johnms
Wriring for new 24 v trolling motor
I am assembling the parts needed to install a 24 V Dc trolling motor. I made my wiring diagram. Can of you experts look at it and tell me if I have this right? Also, where are good places for breakers and what amperage? (There are inline fuses on the dual bank charger leads)
Attachments
Looks good to me . Most 24v trollers use a 50 amp breaker but check the owners manual. The breaker should be installed in the troller positive lead as close to the battery as possible.
This could be harmful to your ability to start your motor.
The optimum setup is 4 batteries, like I have on my Flounder boat.
2 for the 24V trolling motor.
1 dedicated to start the motor.
1 dedicated as a house battery and backup to start the motor.
The optimum setup is 4 batteries, like I have on my Flounder boat.
2 for the 24V trolling motor.
1 dedicated to start the motor.
1 dedicated as a house battery and backup to start the motor.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
