Pensacola Fishing Forum banner
1 - 1 of 1 Posts

· Registered
1,123 Posts
I have a Kenner cc on a single axle Tracker trailer. I like the swing away tounge seems to be a good trailer. It has the side step that runs from the fender all the way to the back of the trailer. This is a good feature unless you want to add guides on the side. I have not found the PVC style or the horizontal carpeted guides withkit that does not require me to cut holes in the step.Most of the ramps near my home are very steep and getting the boat on the trailer usually requires leaving the trailer too shallow, then backing the truck down deeper then cranking it the rest of the way. If I back the truck too far down the boat will float over the fenders:banghead:banghead:banghead. Any ideas?
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.