Pensacola Fishing Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Picked up a older Penn 114-h with two of these installed and a plug where the handle normally attaches - is this the remnants of a left hand conversion kit?
1075254
 

·
OCD Reel Service/Repair
Joined
·
6,305 Posts
That’s a bracket for the Electramate electric motor.

If it has the accessible drags they may be the older thick asbestos washers. 3 of them.

The picture shows the old drag system and the desirable steel main gear. The last forever.
 

Attachments

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
Thank you - yes it has both the drag system and the steel main gear pictured.
 

·
OCD Reel Service/Repair
Joined
·
6,305 Posts
If you need the new 5 stack HT-100 kit let me know. You will need 5 new drag washers and 5 new metal drag washers. With Carbontex drags it will get close to 35 lbs. of drag.

With a custom 7 stack drag system it will get close to 50 lbs of drag.
 

Attachments

1 - 4 of 4 Posts
Top