Pensacola Fishing Forum banner
1 - 20 of 25 Posts

· Premium Member
Joined
·
15,218 Posts
Discussion Starter · #1 ·
Hood Watercraft Motor vehicle Automotive tire Vehicle


Tire Automotive tire Motor vehicle Vehicle Wheel


Automotive tire Asphalt Road surface Gas Motor vehicle


Automotive tire Asphalt Road surface Motor vehicle Plant


Put a couple extra scoops of coffee in the filter this morning and started the next phase of rigging my boat. Ive been planning to take the back deck out from the start so I cut it this morning.

I’m having my glass man build a compartment on the starboard side about 12” deep to hide the rigging tube and wires. The bilge will be glassed in flush with the floor and have a access hatch installed. The gunnel cap and sides will be extended to the back and the splashwell will be smoothed out where the cuts were made. A little gelcoat and I’ll have my deck space lioe I want it again.

I have to reroute a few wires, move the fuel filter, and remove 3 thruhull fittings and it will be time to drop it off with the glass man.

Sometimes you just gotta build them the way you want them.
 

· Bearded Brotula
Joined
·
17,276 Posts
Where you putting a fish box that can hold 1,000 lbs?
 

· Bearded Brotula
Joined
·
17,276 Posts

· Premium Member
Joined
·
15,218 Posts
Discussion Starter · #6 ·
How in the cornbread hell did I miss that shit? 1000lbs?
And I quote
” I have seen some of these guys drift up nearly 1000 pounds of blues cats in a day 50s,60s,70s,80s, and 90 pounders...”

 

· Registered
Joined
·
10,620 Posts
1000 lbs of fish, how much ice do you use for 1000 lbs. Of fish?
I usually use a half pound of ice for a pound of fish on a daily trip. Thats in insulated ice chests.
 

· Green Eggs And Ham
Joined
·
14,129 Posts
CCX633xx XTREME Control Cable
For:

  • SeaStar Solutions and Other Controls which accept 'Universal' Type 10-32 Threaded Cable Ends Including Yamaha, Honda, Suzuki, Nissan and Tohatsu Outboard Engines.
  • Foot Throttle Applications on Performance/Bass boats.
  • Complex and/or Long Cable Runs (or to simply create a superior feel).
Good quality great seller
By Geoff on March 4, 2019 Perfect replacement on my 150 Yamaha
 

· Registered
Joined
·
6,362 Posts
Yes... 10/32 is for Yamaha, Suzuki & Honda.

There are ends that screw on to the 10/32 thread.

As Charlie said...Teleflex CCX633xx XTREME . the xx is the length....Do NOT use anything else....No subsitute.....You'll thank us latter.
 
1 - 20 of 25 Posts
Top