[Sergeant Major]

Anyone know where large egg sinker mold can be bought? I'm looking for 20,22, or 24 ounce sizes.

 

[lobsterman]

Destin Half Hitch has a few if they don't have what you want they will order them for you. You can also google them and find them that way.

 

[Tuna Man]

Best place as far as selection and price (for new) that I've found is .....

http://www.barlowstackle.com/lead-molds.html

 

[Sergeant Major]

I have tried google with no luck and barlow's stops at 16 0r 18 oz. I'll try Destin Halfhitch and see if they have any. Thx

 

[Tuna Man]

Sergeant Major (12/16/2007)I have tried google with no luck and barlow's stops at 16 0r 18 oz. I'll try Destin Halfhitch and see if they have any. Thx

Buy a 20, 22, and 24oz egg sinker and make your own mold with one of these. That's what I'm thinking about doing. A dremel (rotary tool) tool to work the cavity.

http://www.barlowstackle.com/acb/showdetl.cfm?&DID=6&Product_ID=1515&CATID=59

 

[jj]

I heard these people will build you a custom mold.

http://www.do-itmolds.com/prodmolds.aspx?c=92http://www.do-itmolds.com/category.aspx?c=1

 

[billfishhead]

scrap bar stock aluminum a piano hinge and a dremel,,,,,,,,,,go at it

 

[Tuna Man]

jj (1/3/2008)I heard these people will build you a custom mold.

http://www.do-itmolds.com/prodmolds.aspx?c=92<A href="http://www.do-itmolds.com/category.aspx?c=1">[/quote</A>]

You need to read your own site you post......not bashing just fact.

"Unfortunately the Do-It Corporation cannot produce custom work, so we created the Blank Mold. Your local tool and die or machine shop can create a custom cavity for the Blank Mold based on your design."

 

[jj]

You got me. :blush:

At least it's a starting point for him.

 

[Tuna Man]

jj (1/17/2008)You got me. :blush:

At least it's a starting point for him.

Barlow site...$28.99

Do-It site....$36.00

 

[captken]

Make a top pour mold out of oak. They will be long and skinny, not egg shaped. Pour them with a pull pin so you can have slip sinkers.