Pensacola Fishing Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
528 Posts
Discussion Starter #1
Had to share my finished product. I used 2" square aluminum tubing (3/8" thick) for most of it and 1" solid square stock for the top rails to mount the Hulley Rollers and Hull cradles. The square tubing was in the discount bin at T&C, so I went 3/8" thick vs. lighter. Each mount sits on 2 x 2" aluminum angle and is attached to the side rail mount system via a lug and bolt slid into the side rail system. Works great!

We did manage to go out to Pickens today to piddle around. I wanted to see what the load/unloading would be like and to check out some rigging I did. Most worked pretty well. I need a quick release on my anchor trolley as I discovered. All in all, not to bad for a rooking.

See you guys out there.

Bob


http://i891.photobucket.com/albums/ac111/bobhardy3/2012-11-03152801.jpg
 
1 - 1 of 1 Posts
Top