Posts by captken
1 - 6 of 6 Posts
First step.
Mechanical removal of marine encrustation. I just whacked the lure on the board it is laying on and this much came off.
![]()
I whacked the bill area with a heavy bolt and the rest of the marine growth chipped off.
![]()
The lure looks like a Stretch 25 but I don't recognize the pattern. Maybe I'll shoot a photo to Mann's.
Mechanical removal of marine encrustation. I just whacked the lure on the board it is laying on and this much came off.
I whacked the bill area with a heavy bolt and the rest of the marine growth chipped off.
The lure looks like a Stretch 25 but I don't recognize the pattern. Maybe I'll shoot a photo to Mann's.
Not much sense going any further until I test the hangers
I'd hate to have the hangers pull out with a good fish especially after I spent the time refurbishing the lure. Here is how I test hangers. Notice the old rings are still in place.
Testing towing harness and rear hook hanger. Five gallons of water plus the bucket is close to 50 pounds.
![]()
Now I'll test the front hook hanger.
![]()
I just got an e-mail reply from Lanny Deal at Mann's Baits. This is definitely an old Mann's Stretch-25 in a discontinued color. It must have worked because it has lots of teeth marks in it. Kinda hard not to lose lures when the bottom breaks straight up from 28 feet to 15 feet and is covered with coral..
I'd hate to have the hangers pull out with a good fish especially after I spent the time refurbishing the lure. Here is how I test hangers. Notice the old rings are still in place.
Testing towing harness and rear hook hanger. Five gallons of water plus the bucket is close to 50 pounds.
Now I'll test the front hook hanger.
I just got an e-mail reply from Lanny Deal at Mann's Baits. This is definitely an old Mann's Stretch-25 in a discontinued color. It must have worked because it has lots of teeth marks in it. Kinda hard not to lose lures when the bottom breaks straight up from 28 feet to 15 feet and is covered with coral..
Done deal.
I decided to leave the color as is since this color is no longer available. It might be the hot ticket one day.
Several years ago I refurbished the S-30 in the photo. I sanded the lure to remove nicks, filled scratches with JB-Weld then sprayed the entire white with Rustoleum primer. I sprayed the back fluorescent green with more Rustoleum. Next I coated the entire lure with clear epoxy and sprinkled holograph glitter in the wet epoxy. I seldom use the S-30 anymore since I fish shallow water.
![]()
I was amazed to find both eyes looking good. The Stretch series lures are mighty tough. I've probably pulled them 10,000 miles and have caught at least 2 dozen species on them from 6" to 300#.
I decided to leave the color as is since this color is no longer available. It might be the hot ticket one day.
Several years ago I refurbished the S-30 in the photo. I sanded the lure to remove nicks, filled scratches with JB-Weld then sprayed the entire white with Rustoleum primer. I sprayed the back fluorescent green with more Rustoleum. Next I coated the entire lure with clear epoxy and sprinkled holograph glitter in the wet epoxy. I seldom use the S-30 anymore since I fish shallow water.
I was amazed to find both eyes looking good. The Stretch series lures are mighty tough. I've probably pulled them 10,000 miles and have caught at least 2 dozen species on them from 6" to 300#.
Done
I decided to leave the color as is since this color is no longer available. It might be the hot ticket one day.
Several years ago I refurbished the S-30 in the photo. I sanded the lure to remove nicks, filled scratches with JB-Weld then sprayed the entire white with Rustoleum primer. I sprayed the back fluorescent green with more Rustoleum. Next I coated the entire lure with clear epoxy and sprinkled holograph glitter in the wet epoxy. I seldom use the S-30 anymore since I fish shallow water.
![]()
I was amazed to find both eyes looking good. The Stretch series lures are mighty tough. I've probably pulled them 10,000 miles and have caught dozens of species on them from 6" to 300#.
I decided to leave the color as is since this color is no longer available. It might be the hot ticket one day.
Several years ago I refurbished the S-30 in the photo. I sanded the lure to remove nicks, filled scratches with JB-Weld then sprayed the entire white with Rustoleum primer. I sprayed the back fluorescent green with more Rustoleum. Next I coated the entire lure with clear epoxy and sprinkled holograph glitter in the wet epoxy. I seldom use the S-30 anymore since I fish shallow water.
I was amazed to find both eyes looking good. The Stretch series lures are mighty tough. I've probably pulled them 10,000 miles and have caught dozens of species on them from 6" to 300#.
1 - 6 of 6 Posts
Join the discussion
