Pensacola Fishing Forum banner

1 - 9 of 9 Posts

·
OutdoorsMan4Life
Joined
·
491 Posts
Discussion Starter #1 (Edited)
I recently purchased one for my hard kicking Rem 700 in 3006.
Wow what a difference, it now kicks less than a 243, and it looks awesome. Cost was 107.00 $
It stopped my flinching, and along with floating the barrel it is now a sub MOA rifle at 100 yards with factory fusion ammo in 165 gr
These are 3 shot groups at 100 Y

\
 

·
Registered
Joined
·
3,158 Posts
had never heard of these. thanks for sharing. they look cool. do they dig in and scratch or gouge the barrel when you install them? that's a great price to make a tough rifle fun to shoot again.
 

·
lees way2
Joined
·
1,356 Posts
Based on what I have saw and from your post Mark,as soon as I get mine measured I will place my order.If I get -30 off mine Ill be very happy.With there spec sheet I hope I get it on the way Mon. Thanks
 

·
OutdoorsMan4Life
Joined
·
491 Posts
Discussion Starter #5
had never heard of these. thanks for sharing. they look cool. do they dig in and scratch or gouge the barrel when you install them? that's a great price to make a tough rifle fun to shoot again.
No it does not mar the barrel, you actually put a thin coat of Perma Bond Lock Tite on the barrel to help hold it and protect the barrel.
It did change my zero by 1 1/2 inches , 1st group shown, made my adjustments and was dead on 2nd group.
Before I added this, this gun would only shoot 1 1/2 inch groups, now it is 1 inch or less at 100 Yards, might just be I don't flinch now. My wifes 7mm08 kicks harder.
I am very impressed with their product, a very big difference in recoil !
They said the screws were 3/32 allen heads, but I have 5 sets none would fit, went to every parts store in the county, and could not find 1 to fit, 2 mm and 2.5mm would not fit either, I had to use a T15 torque head
 

·
Registered
Joined
·
3,158 Posts
No it does not mar the barrel, you actually put a thin coat of Perma Bond Lock Tite on the barrel to help hold it and protect the barrel.
It did change my zero by 1 1/2 inches , 1st group shown, made my adjustments and was dead on 2nd group.
Before I added this, this gun would only shoot 1 1/2 inch groups, now it is 1 inch or less at 100 Yards, might just be I don't flinch now. My wifes 7mm08 kicks harder.
I am very impressed with their product, a very big difference in recoil !
They said the screws were 3/32 allen heads, but I have 5 sets none would fit, went to every parts store in the county, and could not find 1 to fit, 2 mm and 2.5mm would not fit either, I had to use a T15 torque head
good info! thanks again!
 

·
Registered
Joined
·
187 Posts
Glad it worked for you but the last rifle I had with a muzzle brake (Browning A-Bolt II .270) GAVE me a flinch. The felt recoil from the muzzle blast was hard to comprehend. Shooting it without hearing protection was painful, as well as dumb. Shot it once from a box stand without ear plugs and sold it the next Monday.

Only gun I've never regretted selling.
 

·
US ARMY 2d ID VETERAN
Joined
·
3,097 Posts
Never knew this? They are cheaply priced for what the do and the reviews to back it up. I liked the sound of it, except the clamp-on part, I'd rather have a threaded one. And after checking out their site, they do make them threaded too with the same results. So I'll go that route. Thanks for the info.
 

·
Registered
Joined
·
6,684 Posts
Never knew this? They are cheaply priced for what the do and the reviews to back it up. I liked the sound of it, except the clamp-on part, I'd rather have a threaded one. And after checking out their site, they do make them threaded too with the same results. So I'll go that route. Thanks for the info.
Are you gonna thread your own barrel.

Sent from my SM-N920V using Tapatalk
 
1 - 9 of 9 Posts
Top