Pensacola Fishing Forum banner
1 - 20 of 21 Posts

· Registered
Joined
·
202 Posts
I run 50# on my 50w if using mono. If using a backing of spectra - 65# with a topshot of 50 or 60.

I fish standup only, so using 80# is unrealistic since it is not practical to apply that kind of pressure for long. Plus extra line capacity with 50 vs 80.

I don't even own anything bigger than a 50w. FWIW I feel confident that I can land most fish I would ever encounter with a boat and a fully spooled 50w.
 

· Squid technician
Joined
·
10,557 Posts
I spool my 50s with 100lb spectra backing and 80lb mono topshots. I only fish standup gear as well. Using 80lb and heavier lines on standup is generally looked at as impractical, but with a properly fitted harness and little practice with technique, its surprising how much drag even a modest sized person can produce.
 

· Registered
Joined
·
724 Posts
I use 50 blue.. If you think you need more line back it with bread... Personally if you are in a CC you should never get spooled. The person fighting the fish should stand on the side of the cc wile the driver keeps the fish at a 45 degree angle in front of the boat until it gets within 100 feet then put the fish to the back of the boat and finish the fight. In a sportfish you need all the line you can get.... Just me 2 cents...
 

· IT'S ALL GOOD !
Joined
·
1,352 Posts
Can someone explain why you use hi-vis line ? Is it because you are trolling and you can see it better? Do you still use some kind of clear or floro leader when you use the hi-vis line?
 

· Registered
Joined
·
170 Posts
Can someone explain why you use hi-vis line ? Is it because you are trolling and you can see it better? Do you still use some kind of clear or floro leader when you use the hi-vis line?
High Vis is much easier to see in all applications. I always run fluoro wind-ons on all my reels, which are all spooled with high-vis above the backing. 60# flouro on my 50 and 30 TLD's, and 250# fluoro wind-ons on my 50W tiagras spooled with 80 high vis
 

· Banned
Joined
·
4,906 Posts
Jim it will make you crazy to say the least. Throw on top of that that when dealing higher thread count braids the breaking strength is higher that the line rating. For example the 80 lb hollow core braids the actual breaking strength is around 130 lb. I put braid on reels up to the 70VSV but on the 80's I stayed with 80 lb mono about 900 yds, that's a lot of line. I sent the reels to Cals 2 Speed for beefier drags and some gear changes (30 W's) which enabled me to downsize gear with higher drags and huge line capacity with braid. The 50 W's have 1500 yds of 80 lb hollow core and filled with a top shot of 80 lb mono. I hardly ever even put 80's out any more.
 

· Registered
Joined
·
199 Posts
I agree - keep it simple. 50# Hi Vis Diamond Mamoi. No splices in my line for sure. I do use 80# on my 50WLRS as this real has heavier drag. Change after heavy fish or a couple of times each season.

Hi -Vis so I can see the line - only the clear wind-on leader in the water. If fishing deep for tuna, I use clear or smoke only.

I never use the pretty blue line as the only thing blue I want to see in my spread when I glance back is a big blue marlin!!!!

Matt
Galati Yacht Sales
 
1 - 20 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top