Stainless Thread Gigs? - Page 2

FlounderAssassin · 08-16-2008, 01:50 PM

i have 2 like 9.75 and you are right DFA...they dont come off! i have stuck one at the last min wile running with the TM just stuck and picked the gig right up and came up with a 19" flounder.

AdamD · 08-19-2008, 07:59 PM

DFA, Hi new to the forum long time lurker, Been gigging for many years just not as good as you guys, I see where you are looking for some gigs, I make mine, so if this is what you are looking for I'll be glad to make you one, or how ever you would like to have it made, I can make it anyway you would like. This goes for anybody on the PFF, I would be glad to help any of you guy's wanting one. Just let me know. Adam

nb&twil · 08-19-2008, 08:06 PM

Oh my gosh. Those are stinking nice. A whole heck of a lot prettier than anything I've ever stuck a flouner with!!! How much do you charge per gig head?

nb&twil · 08-19-2008, 08:07 PM

And, by the way... WELCOME!!!!

X-Shark · 08-19-2008, 08:25 PM

That look's like a Billet Alum piece. Pretty Damn Nice.

Look's like you do things the way I do them. It's got to be useful and it has to be extra clean.

AdamD · 08-20-2008, 01:06 AM

Thanks guys, I try to take pride in anything I do, I work at the papermill and build them on my spare time. As for as cost, I haven't ever sold them so I don't know what they are worth. I'm not on here to make money, just to make friends. So I don't think they would be very much, whatever you guy's think. :letsdrink

ishmel407 · 08-20-2008, 02:29 AM

I am not sure what they are worth but I know the ones I bought from Academy were 10 bucks and they are not that nice. And they have the barbs which I dont like.But if you will take 15 a peice I will take two.

Death From Above · 08-20-2008, 09:51 AM

That is the prettiest gig I have ever seen. Gives me goose bumps just looking at it. :bowdown

Cane Pole · 08-22-2008, 09:29 AM

Dizzy Lizzie's in EPH has a couple of threaded 5 prongs with stainless poles and grips. They are on consignement from a guy who makes them. I think he is asking $150. Sounds expensive, but you need to look at it to enjoy it's quality!!!!

Coastal Outfitter · 09-01-2008, 08:58 AM

Hey guys,, I've been building flounder equipment commercially for a few years now . I make stainless steel gigs out of 3/8 inch high quality 18/10 stainless steel rod. The bends are Heat/Oil treated to give them incredible strength. I offer a life time replacement warranty on them.

I also custom build them for any use,, these gigs hold fish despite the lack of barbs,, We can't use barbs here in TX, but if you'd prefer barbs I add them at no charge. If you like more prongs or a custom shape I can do anything. check out me site http://www.coastaloutfitter.com/Texa...%20Prices.html

08-16-2008, 01:50 PM	#11
FlounderAssassin Senior Member Sailfish Join Date: Sep 2007 Location: Cantonment, FL Posts: 2,262	RE: Stainless Thread Gigs? i have 2 like 9.75 and you are right DFA...they dont come off! i have stuck one at the last min wile running with the TM just stuck and picked the gig right up and came up with a 19" flounder.

08-19-2008, 07:59 PM	#12
AdamD Junior Member Cigar Minnow Join Date: Aug 2008 Posts: 3	RE: Stainless Thread Gigs? DFA, Hi new to the forum long time lurker, Been gigging for many years just not as good as you guys, I see where you are looking for some gigs, I make mine, so if this is what you are looking for I'll be glad to make you one, or how ever you would like to have it made, I can make it anyway you would like. This goes for anybody on the PFF, I would be glad to help any of you guy's wanting one. Just let me know. Adam

08-19-2008, 08:06 PM	#13
nb&twil Senior Member Sailfish Join Date: Oct 2007 Location: Pensacola, FL Posts: 1,411	RE: Stainless Thread Gigs? Oh my gosh. Those are stinking nice. A whole heck of a lot prettier than anything I've ever stuck a flouner with!!! How much do you charge per gig head?

08-19-2008, 08:07 PM	#14
nb&twil Senior Member Sailfish Join Date: Oct 2007 Location: Pensacola, FL Posts: 1,411	RE: Stainless Thread Gigs? And, by the way... WELCOME!!!!

08-19-2008, 08:25 PM	#15
X-Shark Senior Member White Marlin Join Date: Oct 2007 Location: Pensacola, Fl. Posts: 3,031	RE: Stainless Thread Gigs? That look's like a Billet Alum piece. Pretty Damn Nice. Look's like you do things the way I do them. It's got to be useful and it has to be extra clean.

08-20-2008, 01:06 AM	#16
AdamD Junior Member Cigar Minnow Join Date: Aug 2008 Posts: 3	RE: Stainless Thread Gigs? Thanks guys, I try to take pride in anything I do, I work at the papermill and build them on my spare time. As for as cost, I haven't ever sold them so I don't know what they are worth. I'm not on here to make money, just to make friends. So I don't think they would be very much, whatever you guy's think. :letsdrink

08-20-2008, 02:29 AM	#17
ishmel407 Senior Member Trigger Join Date: May 2008 Location: Dauphin Island Posts: 248	RE: Stainless Thread Gigs? I am not sure what they are worth but I know the ones I bought from Academy were 10 bucks and they are not that nice. And they have the barbs which I dont like.But if you will take 15 a peice I will take two.

08-20-2008, 09:51 AM	#18
Death From Above Senior Member Sailfish Join Date: Sep 2007 Location: Pensacola Posts: 1,276	RE: Stainless Thread Gigs? That is the prettiest gig I have ever seen. Gives me goose bumps just looking at it. :bowdown

08-22-2008, 09:29 AM	#19
Cane Pole Member Ruby Red Lip Join Date: Jan 2008 Posts: 31	RE: Stainless Thread Gigs? Dizzy Lizzie's in EPH has a couple of threaded 5 prongs with stainless poles and grips. They are on consignement from a guy who makes them. I think he is asking $150. Sounds expensive, but you need to look at it to enjoy it's quality!!!!

09-01-2008, 08:58 AM	#20
Coastal Outfitter Junior Member Cigar Minnow Join Date: Sep 2008 Posts: 3	RE: Stainless Thread Gigs? Hey guys,, I've been building flounder equipment commercially for a few years now . I make stainless steel gigs out of 3/8 inch high quality 18/10 stainless steel rod. The bends are Heat/Oil treated to give them incredible strength. I offer a life time replacement warranty on them. I also custom build them for any use,, these gigs hold fish despite the lack of barbs,, We can't use barbs here in TX, but if you'd prefer barbs I add them at no charge. If you like more prongs or a custom shape I can do anything. check out me site http://www.coastaloutfitter.com/Texa...%20Prices.html

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode