Stainless Thread Gigs?

Death From Above · 08-14-2008, 12:48 PM

Anybody know a retail source for the gig heads madefrom stainless thread or does anyonewant to sell me one. I want one bad.

Buzzbait · 08-14-2008, 01:10 PM

You can get stainless all thread at Threaded Fastner, Ram Tool, etc.

roll tide roll · 08-14-2008, 05:38 PM

i saw some at theboaters world store in the gulf breeze area on hwy 98

Five Prongs Of Fury · 08-14-2008, 05:59 PM

Quote:

Death From Above (8/14/2008)Anybody know a retail source for the gig heads madefrom stainless thread or does anyonewant to sell me one. I want one bad.

Do the gigs that you are looking for have the barbs cut into them or does the thread act as the barbs? I seen the video of the guy in Texas using gigs made from 3 lag bolts but I wasn't impressed with their ability to hold a larger fish.These are the ones that I use and I have had them for 8-10 years and never had a problem.

Flounder9.75 · 08-14-2008, 08:48 PM

Quote:

Death From Above (8/14/2008)Anybody know a retail source for the gig heads madefrom stainless thread or does anyonewant to sell me one. I want one bad.

Nope I had to make mine. But it's was worth every bit of work it took ( not much at all) when I gig one and put it in the boat and never worry about it coming off.

oke

Flounder9.75 · 08-14-2008, 09:29 PM

Like these. They didn't get washed good the last time went ( 2 wks ago ) so they a showing a little rust.

A few jabs in the sand and few fish and they will shine right up

BTW They are over 10yrs old.

They are not the prettiest things ( welding with old SS rods ain't very easy when your not a welder)

roll tide roll · 08-14-2008, 10:42 PM

the ones i saw at boaters world had a threaded stud that screwed into a pole (stainless steel gig)

whitebc13 · 08-15-2008, 11:47 AM

What size threaded rod do you use?

Death From Above · 08-15-2008, 03:00 PM

9.75....Yes.....like those. I've never used one, but heard you can't hardly shake a flounder off of one of them. They are ugly, but I bet they work. I don't know shit about welding so making my own ain't gonna happen. I think I got a line on one.

5 prong.....Those are nice. What I use now is similar, but 3 prong SS. I don't lose one very often, but it does happen.

Flounder9.75 · 08-15-2008, 09:29 PM

Quote:

whitebc13 (8/15/2008)What size threaded rod do you use?

5/16

08-14-2008, 12:48 PM	#1
Death From Above Senior Member Sailfish Join Date: Sep 2007 Location: Pensacola Posts: 1,257	Stainless Thread Gigs? Anybody know a retail source for the gig heads madefrom stainless thread or does anyonewant to sell me one. I want one bad.

08-14-2008, 01:10 PM	#2
Buzzbait Senior Member Trigger Join Date: Oct 2007 Posts: 289	RE: Stainless Thread Gigs? You can get stainless all thread at Threaded Fastner, Ram Tool, etc.

08-14-2008, 05:38 PM	#3
roll tide roll Member Ruby Red Lip Join Date: Jun 2008 Posts: 47	RE: Stainless Thread Gigs? i saw some at theboaters world store in the gulf breeze area on hwy 98

08-14-2008, 09:29 PM	#6
Flounder9.75 Senior Member Trigger Join Date: Sep 2007 Posts: 353	RE: Stainless Thread Gigs? Like these. They didn't get washed good the last time went ( 2 wks ago ) so they a showing a little rust. A few jabs in the sand and few fish and they will shine right up BTW They are over 10yrs old. They are not the prettiest things ( welding with old SS rods ain't very easy when your not a welder) __________________ Flounderin: Like Huntin and Fishin. R.I.P. Rookie We're Goin To Miss You

08-14-2008, 10:42 PM	#7
roll tide roll Member Ruby Red Lip Join Date: Jun 2008 Posts: 47	RE: Stainless Thread Gigs? the ones i saw at boaters world had a threaded stud that screwed into a pole (stainless steel gig)

08-15-2008, 11:47 AM	#8
whitebc13 Member Ruby Red Lip Join Date: Aug 2008 Posts: 30	RE: Stainless Thread Gigs? What size threaded rod do you use?

08-15-2008, 03:00 PM	#9
Death From Above Senior Member Sailfish Join Date: Sep 2007 Location: Pensacola Posts: 1,257	RE: Stainless Thread Gigs? 9.75....Yes.....like those. I've never used one, but heard you can't hardly shake a flounder off of one of them. They are ugly, but I bet they work. I don't know shit about welding so making my own ain't gonna happen. I think I got a line on one. 5 prong.....Those are nice. What I use now is similar, but 3 prong SS. I don't lose one very often, but it does happen.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode