Rhino lining a 10' john boat - Page 2

reelfinatical · 08-21-2008, 02:06 PM

Quote:

Drew Mixon (8/21/2008) i just 'lined' the tub of my CJ7 jeep. i bought a gallon of the stuff off the internet--i wanted grey, instead of black, and put it on with a brush. no spraying. the type at walmart is a brush or roll-on product, pretty sure. easy to use--just like thick paint with tiny pebbles in it.

drew

I did that to my Jeep about two months ago. I used the Dupli-Color Bedlinerfrom O'Reillys. It was pretty simple - Brushed it on, itdriedQUICK in the sun,kept recoating until I emptied the can. Good stuff.

Jason · 08-23-2008, 09:01 AM

On my jon boat I use JB weld and these weld sticks (green colored) I bought on EBAY I think.....They are a wee bit thicker then a pencil and about as long. You heat them up with a propane torch and melt then into place....They seem to work alot better then JBWeld....I'm out and have to look for some more...if I find a link, I'llrepost!!!:letsdrink

Just go to EBAY and search for "aluminum repair" and a few products are available....I did not see the green rods that I got years back though....but the others seem like they'd work too.....good luck....

jspooney · 08-24-2008, 09:34 PM

I have a a pontoon boat that began to develop little holes in it and just put Rhino Lining on the toons. Seems to be a good fix. We'll see.

FlounderAssassin · 08-25-2008, 12:00 AM

the bed liner stuff will work good...only thing is to make sure you fill your gas tank out of the boat. any spilt gas in the boat will cause it to peal up.

blaw · 04-19-2011, 03:32 PM

Quote:

Originally Posted by jspooney

I have a a pontoon boat that began to develop little holes in it and just put Rhino Lining on the toons. Seems to be a good fix. We'll see.

Hi, Did the Rhino Lining work on the pontoons. I was thinking of doing the same thing.

Thanks,

08-23-2008, 09:01 AM	#12
Jason Like a roach in the dark! Blue Marlin Join Date: Oct 2007 Location: In the woods, lookin' fer ticks! Posts: 5,835	RE: Rhino lining a 10' john boat On my jon boat I use JB weld and these weld sticks (green colored) I bought on EBAY I think.....They are a wee bit thicker then a pencil and about as long. You heat them up with a propane torch and melt then into place....They seem to work alot better then JBWeld....I'm out and have to look for some more...if I find a link, I'llrepost!!!:letsdrink Just go to EBAY and search for "aluminum repair" and a few products are available....I did not see the green rods that I got years back though....but the others seem like they'd work too.....good luck....

08-24-2008, 09:34 PM	#13
jspooney Senior Member Sailfish Join Date: Oct 2007 Posts: 2,422	RE: Rhino lining a 10' john boat I have a a pontoon boat that began to develop little holes in it and just put Rhino Lining on the toons. Seems to be a good fix. We'll see.

08-25-2008, 12:00 AM	#14
FlounderAssassin Senior Member Sailfish Join Date: Sep 2007 Location: Cantonment, FL Posts: 2,262	RE: Rhino lining a 10' john boat the bed liner stuff will work good...only thing is to make sure you fill your gas tank out of the boat. any spilt gas in the boat will cause it to peal up.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)