delta dooler

<DIV class=postbody>About 10 years ago, I sold a truck and kept the winch off of it, it was an older Warn 8274, some of the wiring was bad, and it needed a solenoid replaced, well I took it apart, got busy doin something else, and forgot about it, i found it in a milk crate in my shed the other day and would like to get it workin again, BUT, i am not the most mechanically inclined and cant remember how to put back together, would like to PAY someone to get it back goin again. its completely dismantled, I know it needs 4 new solenoids and to be wired and cleaned up, the motor was good when I took i apart so I am asuming that it still is. If anyone on here is up to it, let me know, or else its gonna go on ebay, (as is) </DIV><SPAN class=postbody>

Mellow Yellow

I rebuilt a different model Warn several years ago and it was farily easy with a schematic. Here is a link to your winch being rebuilt.



http://www.pirate4x4.com/tech/billavista/8274/

hewes22

im bot to rebuild an old bellview for my FJ40, in doing it I could give you some tips as I get going on it, but if you dont want to do it I think the guys at enhanced offroad could do it

1956_4x4

I rebuilt mine a while back. I went ahead and installed a stronger motor,new constant duty solenoids, and synthetic line on the drum. I'll see if I can find the wiring schematic.

Smitty

1956_4x4

Check out this info.

http://www.pirate4x4.com/tech/billavista/8274/

Ha!! Just saw that it was posted above.:banghead This is the article that I used when rebuilding mine. I went with the higher hp motor. The 8274 is a great winch.

Smitty

delta dooler

thanx yall !