Rotisserie motor

Bubba · 12-23-2007, 08:16 PM

Anyone have an old grill that the rotisserie motor still works?

jigslinger · 12-23-2007, 08:40 PM

Sounds like a future rod dryer! Good luck.

johnsonbeachbum · 12-24-2007, 10:35 AM

I think I have two, brand new surplus for some hairbrained project I never got around too.

Come and get one and it is free.

bwendel07 · 12-24-2007, 12:06 PM

If you are looking for a rod drying motor find an old microwave and pull out the little turntable motor that spins the tray it works much better.

Bubba · 12-26-2007, 08:53 PM

You all are right, as to my intentions.

PensacolaEd · 12-27-2007, 06:46 AM

You can buy just the motor at either Home Depot or Lowes. I used them before, they work fine as long as you have a good method for securing the rod to it - nothing sucks more than working forty hours on a custom rod, then having it fall off the dryer and all the epoxy sags....

Ed

jigslinger · 01-24-2008, 11:16 PM

I don't know if you made your rod dryer yet but here's an easy one to make.

http://www.steelheader.net/Rodbuilding/rod_dryer.htm

GONU · 01-24-2008, 11:22 PM

:letsdrink:letsdrink

12-23-2007, 08:16 PM	#1
Bubba Senior Member Snapper Join Date: Sep 2007 Posts: 515	Rotisserie motor Anyone have an old grill that the rotisserie motor still works?

12-23-2007, 08:40 PM	#2
jigslinger Senior Member Grouper Join Date: Sep 2007 Location: St. Louis, MO Posts: 1,024	RE: Rotisserie motor Sounds like a future rod dryer! Good luck.

12-24-2007, 10:35 AM	#3
johnsonbeachbum Senior Member Sailfish Join Date: Oct 2007 Posts: 1,683	RE: Rotisserie motor I think I have two, brand new surplus for some hairbrained project I never got around too. Come and get one and it is free.

12-24-2007, 12:06 PM	#4
bwendel07 Senior Member Mingo Join Date: Sep 2007 Location: NICEVILLE Posts: 155	RE: Rotisserie motor If you are looking for a rod drying motor find an old microwave and pull out the little turntable motor that spins the tray it works much better.

12-26-2007, 08:53 PM	#5
Bubba Senior Member Snapper Join Date: Sep 2007 Posts: 515	RE: Rotisserie motor You all are right, as to my intentions.

12-27-2007, 06:46 AM	#6
PensacolaEd Senior Member Sailfish Join Date: Oct 2007 Posts: 1,287	RE: Rotisserie motor You can buy just the motor at either Home Depot or Lowes. I used them before, they work fine as long as you have a good method for securing the rod to it - nothing sucks more than working forty hours on a custom rod, then having it fall off the dryer and all the epoxy sags.... Ed

01-24-2008, 11:16 PM	#7
jigslinger Senior Member Grouper Join Date: Sep 2007 Location: St. Louis, MO Posts: 1,024	RE: Rotisserie motor I don't know if you made your rod dryer yet but here's an easy one to make. http://www.steelheader.net/Rodbuilding/rod_dryer.htm

01-24-2008, 11:22 PM	#8
GONU Senior Member Grouper Join Date: Oct 2007 Location: Navarre Posts: 804	RE: Rotisserie motor :letsdrink:letsdrink

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode