Pensacola Fishing Forum - View Single Post

ul412al · 06-28-2009, 09:58 PM

Welcome to the forum! I had 2 of those motors and I would first check the plugs and plug wires. Sometimes they make partial connection and sometimes the other cylinders will "pull" along a dead one.

As for the other problem, do you get any alarms? If the alarms aren't hooked up, then check the oil level on the motor. If it is fine, check (and/or) replace the impeller. If that doesn't work - take it to Kenny!

06-28-2009, 09:58 PM	#3
ul412al Senior Member Snapper Join Date: Oct 2007 Location: Pensacola Posts: 534	RE: 225 Mercury bogging down Welcome to the forum! I had 2 of those motors and I would first check the plugs and plug wires. Sometimes they make partial connection and sometimes the other cylinders will "pull" along a dead one. As for the other problem, do you get any alarms? If the alarms aren't hooked up, then check the oil level on the motor. If it is fine, check (and/or) replace the impeller. If that doesn't work - take it to Kenny!