Pensacola Fishing Forum - View Single Post

bamafan · 10-13-2008, 04:09 PM

I'd use the WD-40 before using starting fluid. CR motors tend to really advance the timimg when using starting fluid . Might want to check FCA on the CP3 pump, if it sticks open it not want to start. There is a pressure relief valve on the rail might want to check if it is starting to go bad it will dribble and bleed off pressure. I have mine capped ( I've blown 4 of them on my '06) . If you need any help with the FCA ,PM me I'll walk you through it.

That CR motor makes me really miss my p-pumped 12 valvecummins.:banghead

10-13-2008, 04:09 PM	#8
bamafan Senior Member Trigger Join Date: Oct 2007 Posts: 297	RE: Need help Dodge Cummins Engine I'd use the WD-40 before using starting fluid. CR motors tend to really advance the timimg when using starting fluid . Might want to check FCA on the CP3 pump, if it sticks open it not want to start. There is a pressure relief valve on the rail might want to check if it is starting to go bad it will dribble and bleed off pressure. I have mine capped ( I've blown 4 of them on my '06) . If you need any help with the FCA ,PM me I'll walk you through it. That CR motor makes me really miss my p-pumped 12 valvecummins.:banghead